
Readings before the quote
We record moisture content in every affected room and compare it to dry standard. You see the numbers that drive the scope, not just a total at the bottom.
One crew handles the whole job: inspection, containment, removal, treatment and clearance. We do not hand you off to a subcontractor halfway through. Whether you need a Mold removal company in Lacey WA for a rental turnover or a full crawl space dig-out, the same process applies. Every service below starts with readings and ends with documentation you can hand to an insurer or a buyer.

One crew handles the whole job: inspection, containment, removal, treatment and clearance. We do not hand you off to a subcontractor halfway through. Whether you need a Mold removal company in Lacey WA for a rental turnover or a full crawl space dig-out, the same process applies. Every service below starts with readings and ends with documentation you can hand to an insurer or a buyer.
Mold removalPhysical removal of contaminated drywall, insulation, framing and trim, followed by HEPA vacuuming and antimicrobial treatment. We bag debris in the containment zone and haul it out the same day so spores do not travel through the house.
Mold testingAir and surface sampling to confirm what is growing and how concentrated it is. Useful before a real estate transaction or after a water damage event. We send samples to an accredited lab and explain the results in plain language.
Mold inspectionA full walkthrough with moisture meter, thermal imaging camera and boroscope to find hidden mold behind walls and under flooring. You get photos, readings and a written scope with the affected areas marked.
Black mold removalBlack mold needs containment and PPE, not a spray bottle. We set negative air machines with HEPA filters, remove affected material and treat framing with an antimicrobial solution. Clearance readings confirm the area is dry and clean.
Basement mold remediationBasements in Lacey collect moisture from soil and condensation. We remove affected finishes, treat the structure, and address the vapor barrier and drainage so the same wall does not bloom again next winter.
Attic mold remediationAttic mold usually traces back to poor ventilation or a roof leak. We remove contaminated sheathing and insulation, treat the framing, and correct the ventilation path so warm moist air stops condensing on the deck.
Crawl space mold remediationCrawl spaces are the most common mold call we get in Thurston County. We remove fallen insulation, treat joists and subfloor, install a new vapor barrier and set dehumidifiers to bring the space back to a stable moisture level.
Emergency mold remediationWhen a supply line lets go or a storm pushes water under a door, mold can start within 48 hours. Our emergency Mold Remediation Lacey WA response includes extraction, drying with air movers and Dri-Eaz dehumidifiers, and containment before the growth spreads.
Bathroom mold remediationBathroom mold lives in caulk lines, behind tile and above the ceiling from fan failures. We remove affected material, treat the framing, and check that the exhaust fan actually moves air. A fan that vents into the attic just moves the problem.
Mold treatmentTreatment covers the surfaces that stay in place: framing, sheathing and joists. We apply antimicrobial solution and, where needed, encapsulation film to seal porous surfaces. Treatment follows removal, never replaces it.The process is the same whether the job is a bathroom ceiling or a 1,200-square-foot crawl space. We inspect, contain, remove, treat and verify. You get readings and photos at each stage, and we do not close a job until the moisture numbers are back to dry standard.

We walk the property with a moisture meter, thermal imaging camera and boroscope. Readings get recorded room by room, and we trace the water source. You get a written scope with the affected areas marked before any work starts.

We seal doorways and vents with poly and set negative air machines with HEPA filters. This keeps spores from drifting into clean rooms while we work. Daily checks confirm the containment is holding pressure.

Contaminated drywall, insulation and trim come out and leave in sealed bags. Framing and sheathing get treated with antimicrobial solution, and porous surfaces get encapsulation film where needed. We use Fiberlock and Concrobium products on the surfaces that stay.

Air movers and Dri-Eaz dehumidifiers bring wet assemblies back to dry standard. We take final moisture readings and, when the job calls for it, arrange lab sampling. You get the clearance documentation in hand before we pack up.
Mold work fails when the moisture source is ignored. We treat the cause first, then the growth. That single habit is why repeat calls to the same wall are rare on our jobs, and why property managers in Lacey keep our number on file.


Poly barriers and negative air machines go in before demolition starts. Spores stay in the work zone, and daily checks confirm the seal is holding pressure.
A thermal imaging camera and boroscope find where water is actually entering. We fix the leak or ventilation path so the same wall does not bloom again next season.

Contaminated drywall and insulation go into bags inside the containment zone. Nothing travels through your living room, and the haul-out happens the same day.
Final moisture readings and photos go into a written summary you can hand to an insurer or a buyer. The job closes when the numbers are dry, not when the crew leaves.
The questions we get most often from Lacey homeowners and property managers, answered directly.
Still wondering? 3609950233

Most jobs in Lacey run $450 to $4,500 in 2026, with a full crawl space or multi-room remediation reaching $12,000. The number depends on affected square footage, whether framing needs treatment, and how much material has to come out. We inspect first and give you a written scope with readings before any work starts.
The right company is the one that measures moisture before quoting and gives you a written scope with photos. Ask whether they use containment and negative air machines, and whether they will show you post-job readings. We have worked in Lacey since 2018 and will walk you through the same process on your property.
Yes, when the moisture source is fixed. Remediation removes the growth and treats the structure, but mold returns if a leak or high humidity stays in place. That is why we trace the water source first and correct ventilation or vapor barriers as part of the job. Final readings confirm the assembly is dry.
Look for three things: moisture readings before the quote, containment with negative air machines during the work, and a written clearance summary at the end. Ask whether they use a boroscope or thermal imaging camera to find hidden growth. A company that skips the diagnostics is guessing at your expense.
Yes. Water damage can feed mold within 48 hours, so we prioritize calls after a supply line failure or storm flooding. Our emergency Mold Remediation Lacey WA response includes extraction, containment and drying equipment set the same day. Call 360-995-0233 and describe what happened so we bring the right gear.
Same-day inspections, written scopes and readings you can see. Call 360-995-0233 and we will walk your property with a moisture meter and thermal camera before quoting a thing.
Call 360-995-0233 or email [email protected] to book an inspection. We answer the phone during business hours and return after-hours messages first thing the next morning. Most inspections get scheduled within one business day, and we serve all of Lacey and the surrounding Thurston County area.